Tag Archives: Home Recording

EQ Tips & Tricks for Pedal Steel

Ahhh…the pedal steel. Sometimes there’s nothing more delectable than the sound of a well-mixed, sonically pleasing pedal steel in a recording. Add some tasteful playing, good tonality, and a hip song, and listeners are in for a treat. But besides flavorful playing by a solid player, what can make the pedal steel sound even more wonderful on record? Equalize it.

Equalization involves boosting or cutting volume levels at certain frequencies to alter the sound of a signal. Different frequencies affect the sonic space of a recording in their own way, and influencing them with EQ can improve the sound of a recorded instrument or song. With a distinctive timbre and broad frequency range, the pedal steel can often benefit from some EQ in the pre or post-production stages.

EQing during Mixing

Let’s assume the pedal steel player, engineers, and producers did their best to capture a good sound out of the pedal steel during a session…they may have had ideas on what amps to use, mics, tones they were seeking, etc. (Or if recording one’s self at home, a pedal steel player may have similar ideas for capturing the instrument’s sounds.) After the pedal steel has been recorded, the mixing process will begin to look at how the pedal steel sounds by itself, how it sounds in relation to other instruments, and how it will sound in the overall recording. This is a good time to look at how EQ can affect the pedal steel’s sound.

IMG_3307

There are no set rules for mixing pedal steel or EQing it, so these EQ tips contain advice to help a person calibrate and experiment with sounds they want to achieve in the recording. Often, less is more with EQ or other effects, so I usually find myself using EQ as a way to compliment and enhance what already sounds good with the recorded signal. For instance, if the high frequencies of the pedal steel sound great already, then I won’t mess with them (if it ain’t broke, don’t fix it mentality). However, if the lower end frequencies of the pedal steel sound muddied, boomy, or weird, while the highs sound great, then EQing the low end can make the steel track sound much better – combine this with the already great sounding highs, and we now have a solidly pleasant pedal steel sound that we can move forward with.

EQ Tips & Tricks

After mixing pedal steel numerous times for recordings with bands, singer-songwriters, and solo playing, here are the most common and successful uses I have found for EQ on the pedal steel:

  • Cut between 300 and 400 Hz with a fairly wide Q – This is often a very boomy, muddy, and dense area of the frequency range that can hold a lot of unwanted energy and sound that a listener can live without. Cutting this area usually results in a cleaner steel sound, allowing the mids to sound clearer, and the highs to have more presence. Also, it will give the bass and drums more room to breathe and thrive in the lower end of the frequency spectrum – we don’t want to step on their toes too much, especially if the pedal steel is being utilized more for its higher frequencies in the recording.

Furthermore, if we are playing lower frequencies on our steel (C6 bass notes especially), cutting this 300-400 Hz range can help define and provide “oomph” to these lower notes, and give them more impact on the listener without bogging them down. I often cut the gain pretty aggressively on this adjustment…I’ve found myself cutting anywhere from 3 dB to 9 dB with a fairly wide Q. [Note: this cut works wonders when mixing a drum kit – it will usually clear up the sound of the overall drums in an amazing manner.]

  • Slightly boost 10 kHz and higher with a shelf – This will add more presence to the pedal steel, and allow the highs to “crystallize” and sparkle within the recording. The pedal steel is often known for its higher frequencies, and its ability to “cry” in the upper threshold of the sonic spectrum. This boost can magnify this characteristic of the pedal steel, and allow listeners to indulge in its highs. Don’t overdue it though: a 0.5 to 1.0 db boost is usually plenty with this shelf.
  • Cut 4 kHz with a sharp Q – I often find that when a recorded instrument sounds shrill or irritating in the mids to highs that it can really benefit from a 4K cut. The human ears are pretty sensitive around this frequency range; if a recording has too much going on in this frequency range, then it can often feel like someone is throwing a dart into your ear. That sounds pretty rough, and may be a little exaggerated, but it is often true. My guess is that if a person scrapes their nails on a chalkboard (are your ears hurting yet?), and it is recorded, this recording won’t sound nearly as bad if a 4K cut is added to it. Alright, you get the point.

But for real, with many recordings and recorded instruments, if there is some harshness in the mids to highs, it can often live in the 4 kHz area. This pertains to the pedal steel as well, so let’s fluff up this great sounding instrument and make it feel real comfortable to listeners’ ears by cutting 4K if there is some harshness. I do this with a fairly sharp Q, and usually cut between 1.0 dB to 3.5 dB depending on the severity. I use a sharp Q to be sure not to mess with other important harmonics, tones, or frequencies that are important to the overall sound of the instrument – I don’t want to step on any frequency’s toes if they are adding pleasantness to the sound, especially in the higher frequencies of the pedal steel.

  • Don’t give away your Grandma’s secret recipe, but boosting 20 kHz can really spice up the meal – So, you may be asking: “I thought humans can only hear sounds within the 20 Hz to 20,000 Hz range?” Well there is some truth to this, but that doesn’t mean sonic energy doesn’t live outside of this range…just ask dogs, many of them can hear well beyond 20,000 Hz. Well, besides that we want man’s best friend to enjoy the sound of our pedal steels, there is also another reason to boost here: it can really add some air, lucidity, and sparkle to the sound.

This boost is like adding presence to the sound, but at an even higher elevation, at a place where clouds mist into snow-capped peaks and angels wave huge feathers to provide a nice relaxing breeze for whomever finds themselves in this 20K and beyond oasis. OK, back to earth (can you tell I really like this EQ trick?). This tip was taught to me by a Grammy-winning mastering engineer, and I am forever grateful. It is very hard to hear the difference between before and after this boost, but it is there and with critical ears it can be found, just give it some time. I usually boost 0.5 dB here, and enjoy how fluffy it makes the instrument sound, especially since the pedal steel enjoys frolicking in the high frequencies.

IMG_3306

A/B Testing: Reap your Rewards

A great way to see/hear these EQ tips in action is to use the bypass button on your EQ plug-in, and A/B (compare before and after) the added equalization. For instance, take the 4K cut mentioned earlier…listen to the pedal steel as it originally sounded. Next, add in the cut on your EQ. Now take a listen…notice any difference? Maybe, maybe not…well go ahead and hit the bypass button on your plug-in to see what it sounded like without EQ again. Now add the EQ into it again by releasing the bypass button. Try to listen for any subtle changes in the sound of the instrument with and without the EQ.

It may take a few or several comparisons, but chances are you’ll notice some differences and whether or not they improve the sound. Try closing your eyes, if you’re having trouble hearing the differences. Or try clicking the bypass button with your eyes closed a random amount of times, then click it again, and see what sounds better to your ears…then once you have which one you think sounds better, open your eyes and see if it’s the one with EQ on it. This may help you narrow down whether or not the EQ is actually helping the overall sound.

These EQ tips are just suggestions if one isn’t completely happy with the sound they’re hearing with the recording…there are often times when the recorded signal sounds great already and will hold up beautifully on its own. However, experimenting with these tips can be a great way to learn the effect different frequencies can have on the ears. It can also be a great way to better understand the sound of the pedal steel, and how EQing it can affect it. Also, these EQ tricks can be used on amplifiers and EQ pedals at a gig, in the practice room, or on that snow-capped oasis land mentioned earlier. Enjoy the experimenting, and I hope you get closer to the sound you desire!


Check out these tonal personalities for sonic inspiration…

Cindy Cashdollar

Greg Leisz

Buddy Emmons

Lloyd Green

Recording Pedal Steel At Home

Recording pedal steel can be tricky, from both an engineer’s standpoint and player’s standpoint.  Although you can actually get a great tone from recording direct, if you use the right equipment.  This makes recording at home easier, and more affordable.

It may be worthwhile to invest in some home recording equipment: for improving your practicing and technique, as well as for getting paying work.

If you get the right equipment, and spend some time learning how to properly manipulate it, then you can make great quality recordings from your practice room.  With the Internet, you can easily overdub and send professional-quality pedal steel for clients’ recordings.  You never know who in your neighborhood may want some steel on their tracks!

Recording pedal steel with a direct input

I recommend and use the Digidesign 003 rack+ unit, and run it into an old MacBook Pro.  I use ProTools because it is commonly used in professional studios, and it is included with the unit I believe.  I usually run my pedal steel directly out of the XLR output on my Nashville 112 amp into the Digi003.  You don’t need a microphone with this setup!


Record Pedal Steel with a Digidesign 003

Here’s a pic of the unit; showing how portable it is, for sounding as “big” as it does.  It is sitting on top of my large pedalboard’s road case, which can serve as a nice table in your practice area.  All that’s needed now is a computer on top of it, some cables/cords hooked up, and some good ole’ pedal steel playing.


Recording yourself can really put your playing under the microscope.  While embarrassing at first, it can really humble you and show you areas of your playing that need improvement, which you wouldn’t have noticed before.  Especially good for noticing playing on time (can you play with a click track?), playing cleanly, and volume pedal technique.

Click here for audio recordings I have made with this setup from home.